Stem automot$ (all stems)

256 papers:

ECSA-2015-SporerMKB #agile #approach #design #requirements

A Lean Automotive E/E-System Design Approach with Integrated Requirements Management Capability (HS, GM, CK, EB), pp. 251–258.

QoSA-2015-DurisicST #architecture #identification #set #standard

Identifying Optimal Sets of Standardized Architectural Features: A Method and its Automotive Application (DD, MS, MT), pp. 103–112.

WICSA-2015-EliassonHPL #architecture

Architecting in the Automotive Domain: Descriptive vs Prescriptive Architecture (UE, RH, PP, JL), pp. 115–118.

DAC-2015-EspinosaHAAR #analysis #correlation #robust #set #verification

Analysis and RTL correlation of instruction set simulators for automotive microcontroller robustness verification (JE, CH, JA, DdA, JCR), p. 6.

DAC-2015-KashyapGS #design #reliability

Achieving power and reliability sign-off for automotive semiconductor designs (AK, SG, SS), p. 6.

DAC-2015-KleebergerRC #design #verification

Design & verification of automotive SoC firmware (VBK, SR, RC), p. 6.

DAC-2015-KrishnaNRT #analysis #composition #modelling #product line

Compositional modeling and analysis of automotive feature product lines (SNK, GKN, SR, AT), p. 6.

DAC-2015-MundhenkSLFC #analysis #architecture #model checking #probability #security #using

Security analysis of automotive architectures using probabilistic model checking (PM, SS, ML, SAF, SC), p. 6.

DAC-2015-PetrenkoTR #challenge #modelling #testing

Model-based testing of automotive software: some challenges and solutions (AP, ONT, SR), p. 6.

DAC-2015-SchatzVZ #automation #component #deployment

Automating design-space exploration: optimal deployment of automotive SW-components in an ISO26262 context (BS, SV, SZ), p. 6.

DAC-2015-ShreejithF #embedded #generative #network #security

Security aware network controllers for next generation automotive embedded systems (SS, SAF), p. 6.

DAC-2015-VatanparvarF

Battery lifetime-aware automotive climate control for electric vehicles (KV, MAAF), p. 6.

DAC-2015-YuJTSS #challenge #integration #modelling

The challenge of interoperability: model-based integration for automotive control software (HY, PJ, JPT, SKS, SS), p. 6.

DAC-2015-ZiegenbeinH #design

Timing-aware control software design for automotive systems (DZ, AH), p. 6.

DATE-2015-HernandezA #low cost #safety

Low-cost checkpointing in automotive safety-relevant systems (CH, JA), pp. 91–96.

DATE-2015-MundhenkSLFC #authentication #lightweight #network

Lightweight authentication for secure automotive networks (PM, SS, ML, SAF, SC), pp. 285–288.

DATE-2015-ReichPEB #component #design #flexibility #proving

Silicon proof of the intelligent analog IP design flow for flexible automotive components (TR, HDBP, UE, RB), pp. 403–404.

MSR-2015-AltingerSDW #dataset #embedded #fault #industrial #modelling #novel #predict

A Novel Industry Grade Dataset for Fault Prediction Based on Model-Driven Developed Automotive Embedded Software (HA, SS, YD, FW), pp. 494–497.

DHM-EH-2015-Hu0LZY #3d #analysis #development #finite

Development of a 3D Finite Element Model of the Chinese 50th Male for the Analysis of Automotive Impact (HH, LD, XL, CZ, YY), pp. 258–265.

DHM-EH-2015-HuDLZY #analysis

Biomechanical Analysis of Human Thorax and Abdomen During Automotive Impact (HH, LD, XL, CZ, YY), pp. 266–273.

DUXU-IXD-2015-Pauzie

Head Up Display in Automotive: A New Reality for the Driver (AP), pp. 505–516.

HCI-IT-2015-HolsteinWWL #challenge #user interface

Current Challenges in Compositing Heterogeneous User Interfaces for Automotive Purposes (TH, MW, JW, RL), pp. 531–542.

HCI-UC-2015-BorsciLBJ #assessment #prototype

Early Prototype Assessment of a New Virtual System for Training Procedural Skills of Automotive Service Operators: LARTE Tool (SB, GL, MB, BJ), pp. 135–143.

HCI-UC-2015-LawsonSW #industrial #process

VR Processes in the Automotive Industry (GL, DS, BW), pp. 208–217.

ECMFA-J-2012-SelimWCD15 #deployment #industrial #legacy #migration #model transformation #modelling

Model transformations for migrating legacy deployment models in the automotive industry (GMKS, SW, JRC, JD), pp. 365–381.

MoDELS-2015-HajriGBS #approach #case study #embedded #industrial #lessons learnt #modelling #product line

Applying product line Use case modeling in an industrial automotive embedded system: Lessons learned and a refined approach (IH, AG, LCB, TS), pp. 338–347.

MoDELS-2015-S #challenge #modelling #named #smarttech

Automobile: Aircraft or smartphone? Modeling challenges and opportunities in Automotive Systems (keynote) (RS), p. 3.

SAC-2015-ByunC #automation #constraints #operating system #safety #testing #using

Automated system-level safety testing using constraint patterns for automotive operating systems (TB, YC), pp. 1815–1822.

ESEC-FSE-2015-GreenyerHMB #analysis #re-engineering #requirements

Evaluating a formal scenario-based method for the requirements analysis in automotive software engineering (JG, MH, JM, RB), pp. 1002–1005.

ESEC-FSE-2015-Vost #industrial #integration

Vehicle level continuous integration in the automotive industry (SV), pp. 1026–1029.

SPLC-2015-KassmeyerSS #impact analysis #process #safety #variability

A process to support a systematic change impact analysis of variability and safety in automotive functions (MK, MS, MS), pp. 235–244.

SPLC-2015-WozniakC #how #product line

How automotive engineering is taking product line engineering to the extreme (LW, PC), pp. 327–336.

ICST-2015-ArltMPW #dependence #testing

If A Fails, Can B Still Succeed? Inferring Dependencies between Test Results in Automotive System Testing (SA, TM, AP, SW), pp. 1–10.

ICST-2015-Rapos #co-evolution #industrial #modelling #testing

Co-Evolution of Model-Based Tests for Industrial Automotive Software (EJR), pp. 1–2.

ICST-2015-Salloum #data transformation #development #information management #integration #process

Seamless Integration of Test Information Management and Calibration Data Management in the Overall Automotive Development Process (CES), pp. 1–3.

QoSA-2014-DajsurenGSWVB #architecture #formal method

Formalizing correspondence rules for automotive architecture views (YD, CMG, AS, AW, BV, MvdB), pp. 129–138.

ASE-2014-WozniakNZMPG #component #design

Assigning time budgets to component functions in the design of time-critical automotive systems (EW, MDN, HZ, CM, STP, SG), pp. 235–246.

DAC-2014-DongZC #algorithm #online #performance #reduction

A Cost Efficient Online Algorithm for Automotive Idling Reduction (CD, HZ, MC), p. 6.

DAC-2014-EckerVZG #design

Metasynthesis for Designing Automotive SoCs (WE, MV, LZ, AG), p. 6.

DAC-2014-KosmidisQAFWC #certification #hardware

Containing Timing-Related Certification Cost in Automotive Systems Deploying Complex Hardware (LK, EQ, JA, GF, FW, FJC), p. 6.

DAC-2014-LinRGDS #algorithm #performance

An Efficient Wire Routing and Wire Sizing Algorithm for Weight Minimization of Automotive Systems (CWL, LR, PG, JD, ALSV), p. 6.

DAC-2014-OetjensBBBBCCDEGKKLM0MPPRRRSSTV #challenge #evaluation #prototype #research #safety #state of the art #using

Safety Evaluation of Automotive Electronics Using Virtual Prototypes: State of the Art and Research Challenges (JHO, NB, MB, OB, AB, MC, SC, RD, WE, KG, TK, CK, HML, MM, WM, DMG, FP, HP, SR, WR, SR, US, AvS, BAT, AV), p. 6.

DAC-2014-QuintonBHNNE #analysis #design #network

Typical Worst Case Response-Time Analysis and its Use in Automotive Network Design (SQ, TTB, JH, MN, MN, RE), p. 6.

DAC-2014-ReimannGTCGUWEA #architecture #integration

Advanced Diagnosis: SBST and BIST Integration in Automotive E/E Architectures (FR, MG, JT, AC, LRG, DU, HJW, PE, UA), p. 9.

DAC-2014-SagstetterAWLSCK #architecture #framework #integration

Schedule Integration Framework for Time-Triggered Automotive Architectures (FS, SA, PW, ML, HS, SC, AK), p. 6.

DAC-2014-WasicekDL #aspect-oriented #cyber-physical #modelling

Aspect-oriented Modeling of Attacks in Automotive Cyber-Physical Systems (AW, PD, EAL), p. 6.

DAC-2014-ZalmanM #communication #low cost

A Secure but still Safe and Low Cost Automotive Communication Technique (RZ, AM), p. 5.

DATE-2014-AbeleinCEGRGRTUW #architecture #integration

Non-intrusive integration of advanced diagnosis features in automotive E/E-architectures (UA, AC, PE, MG, FR, LRG, TR, JT, DU, HJW), pp. 1–6.

DATE-2014-Bolle #roadmap

The connected car and its implication to the automotive chip roadmap (MB), p. 1.

DATE-2014-CanedoFR #automation #cyber-physical #design #multi

Multi-disciplinary integrated design automation tool for automotive cyber-physical systems (AC, MAAF, JHR), pp. 1–2.

DATE-2014-GrafGTL #design #embedded #multi

Multi-variant-based design space exploration for automotive embedded systems (SG, MG, JT, CL), pp. 1–6.

DATE-2014-HarrantNKGP #assessment #robust

Emulation-based robustness assessment for automotive smart-power ICs (MH, TN, JK, CG, GP), pp. 1–6.

DATE-2014-NirmaierBHVBRP #assessment #robust

Mission profile aware robustness assessment of automotive power devices (TN, AB, MH, AV, OB, WR, GP), pp. 1–6.

DATE-2014-PandeyV #analysis #fault #safety

Transient errors resiliency analysis technique for automotive safety critical applications (SP, BV), pp. 1–4.

DATE-2014-Thanner #lifecycle #prototype

Virtual prototype life cycle in automotive applications (MT), p. 1.

CSMR-WCRE-2014-AlalfiCD #analysis #clustering #experience #industrial

Analysis and clustering of model clones: An automotive industrial experience (MHA, JRC, TRD), pp. 375–378.

CSMR-WCRE-2014-QuanteTS #c #case study #towards

Towards recovering and exploiting domain knowledge from C code: A case study on automotive software (JQ, MT, JS), pp. 383–386.

CSMR-WCRE-2014-ZhangPNMELWCT #architecture #embedded #experience

Experience on applying software architecture recovery to automotive embedded systems (XZ, MP, MN, BM, AE, HL, JW, DJC, MT), pp. 379–382.

ICSME-2014-Rapos #co-evolution #industrial #modelling #testing

Co-evolution of Model-Based Tests for Industrial Automotive Software (EJR), p. 663.

GT-VMT-2014-BrennerGHLST #case study #realtime #sequence #testing #validation

ScenarioTools Real-Time Play-Out for Test Sequence Validation in an Automotive Case Study (CB, JG, JH, GL, GS, MT).

DHM-2014-Li0ZHZ #case study #evaluation

Study on the Evaluation of Automotive Seat Comfort during Prolonged Simulated Driving (XL, LD, QXZ, HH, CZ), pp. 101–111.

DUXU-ELAS-2014-KnollVS #comprehension #user interface

Developing the HMI of Electric Vehicles — On the Necessity of a Broader Understanding of Automotive User Interface Engineering (CK, RV, IS), pp. 293–304.

RE-2014-FilipovikjNR #approach #formal method #requirements

Reassessing the pattern-based approach for formalizing requirements in the automotive domain (PF, MN, GRN), pp. 444–450.

RE-2014-ZhouLLLKL #feature model #requirements #towards #validation

Towards feature-oriented requirements validation for automotive systems (JZ, YL, KL, HL, DK, BL), pp. 428–436.

SAC-2014-KangS #analysis #implementation #scheduling

Schedulability analysis support for automotive systems: from requirement to implementation (EYK, PYS), pp. 1080–1085.

SPLC-2014-LanduytbHMJMJBA #design #safety #towards #variability

Towards managing variability in the safety design of an automotive hall effect sensor (DVL, SOdb, AH, SM, WJ, SM, GdJ, OB, MA), pp. 304–309.

CASE-2013-ZhaoLL #assembly

Dynamic production control of door manufacturing line at an automotive assembly plant (CZ, YL, JL), pp. 398–403.

DATE-2013-GoswamiMSXC #design #multi

Multirate controller design for resource- and schedule-constrained automotive ECUs (DG, AM, RS, CJX, SC), pp. 1123–1126.

DATE-2013-HankMVK #network

Automotive ethernet: in-vehicle networking and smart mobility (PH, SM, OV, JVdK), pp. 1735–1739.

DATE-2013-KatoenNWSS #energy #modelling #optimisation

Model-based energy optimization of automotive control systems (JPK, TN, HW, TS, DS), pp. 761–766.

DATE-2013-Mitcheson #adaptation #energy #performance #question

Adaptable, high performance energy harvesters: can energy harvesting deliver enough power for automotive electronics? (PDM), p. 482.

DATE-2013-SagstetterLSWBHJPPC #architecture #challenge #design #hardware #security

Security challenges in automotive hardware/software architecture design (FS, ML, SS, MW, AB, WRH, SJ, TP, AP, SC), pp. 458–463.

DATE-2013-ZafalonCV #industrial

e-Mobility the next frontier for automotive industry (RZ, GC, OV), pp. 1745–1748.

DHM-SET-2013-MurataKH #effectiveness #multi

Effectiveness of Automotive Warning System Presented with Multiple Sensory Modalities (AM, MK, TH), pp. 88–97.

DHM-SET-2013-MurataKMH

Proposal of Automotive 8-directional Warning System That Makes Use of Tactile Apparent Movement (AM, SK, MM, TH), pp. 98–107.

HCI-AMTE-2013-MeixnerOK #development #evaluation #industrial #modelling #user interface

Evaluation of User Interface Description Languages for Model-Based User Interface Development in the German Automotive Industry (GM, MO, MK), pp. 411–420.

HCI-UC-2013-KleinS #approach #development #industrial #process #social #social media

Social Media in the Product Development Process of the Automotive Industry: A New Approach (AK, GS), pp. 396–401.

HIMI-HSM-2013-CastronovoMM #interface #what

What, Where, and When? Intelligent Presentation Management for Automotive Human Machine Interfaces and Its Application (SC, AM, CAM), pp. 460–469.

HIMI-LCCB-2013-BarotH #implementation #interface #lifecycle

Lifecycle Support of Automotive Manufacturing Systems through a Next-Generation Operator Interface Implementation (VB, RH), pp. 277–286.

MoDELS-2013-SelimBCDW #automation #industrial #model transformation #verification

Automated Verification of Model Transformations in the Automotive Industry (GMKS, FB, JRC, JD, SW), pp. 690–706.

MoDELS-2013-SelimBCDW #automation #industrial #model transformation #verification

Automated Verification of Model Transformations in the Automotive Industry (GMKS, FB, JRC, JD, SW), pp. 690–706.

RE-2013-VogelsanagF #challenge #dependence #empirical #requirements #why

Why feature dependencies challenge the requirements engineering of automotive systems: An empirical study (AV, SF), pp. 267–272.

ESEC-FSE-2013-Dajsuren #architecture #quality

Automotive architecture description and its quality (YD), pp. 727–730.

SPLC-2013-DumitrescuMSD #experience #modelling #product line #variability

Bridging the gap between product lines and systems engineering: an experience in variability management for automotive model based systems engineering (CD, RM, CS, AD), pp. 254–263.

SPLC-2013-Goto #development

Innovation of automotive software development (MG), pp. 5–6.

QoSA-2012-DajsurenBSH #architecture #case study #consistency #multi

Automotive ADLS: a study on enforcing consistency through multiple architectural levels (YD, MvdB, AS, RH), pp. 71–80.

CASE-2012-LeeKLYBM #3d #automation #visual notation

3D visual perception system for bin picking in automotive sub-assembly automation (SL, JK, ML, KY, LGB, RM), pp. 706–713.

CASE-2012-MeikePBVR #energy #industrial #multi #performance

Increasing the energy efficiency of multi-robot production lines in the automotive industry (DM, MP, GB, AV, LR), pp. 700–705.

CASE-2012-ParkPC #automation #design #injection

Design automation of valve gate locations and open timing for injection molding of an automotive instrument panel (CHP, BGP, DHC), pp. 843–845.

DAC-2012-EberlGTA #automation #design #network

Considering diagnosis functionality during automatic system-level design of automotive networks (ME, MG, JT, UA), pp. 205–213.

DATE-2012-AbeleinLHS #challenge #complexity #quality #robust

Complexity, quality and robustness — the challenges of tomorrow’s automotive electronics (UA, HL, DH, SS), pp. 870–871.

DATE-2012-GoswamiLSC #implementation

Time-triggered implementations of mixed-criticality automotive software (DG, ML, RS, SC), pp. 1227–1232.

DATE-2012-MilbredtGLST #approach #architecture #design

Designing FlexRay-based automotive architectures: A holistic OEM approach (PM, MG, ML, AS, JT), pp. 276–279.

DATE-2012-NirmaierBTHKRLP #robust

Measuring and improving the robustness of automotive smart power microelectronics (TN, VMzB, MT, MH, MK, MR, JL, GP), pp. 872–873.

DATE-2012-RoxEG #analysis #design #network #using

Using timing analysis for the design of future switched based Ethernet automotive networks (JR, RE, PG), pp. 57–62.

DATE-2012-SahlbachWE

A high-performance dense block matching solution for automotive 6D-vision (HS, SW, RE), pp. 268–271.

DATE-2012-SchmutzlerSB #on the

On demand dependent deactivation of automotive ECUs (CS, MS, JB), pp. 69–74.

DATE-2012-TurturiciSFF #embedded #power management #realtime

Low-power embedded system for real-time correction of fish-eye automotive cameras (MT, SS, LF, EF), pp. 340–341.

DATE-2012-WanK #embedded #monitoring

Monitoring active filters under automotive aging scenarios with embedded instrument (JW, HGK), pp. 1096–1101.

ICSM-2012-ThumsQ #embedded #re-engineering

Reengineering embedded automotive software (AT, JQ), pp. 493–502.

AdaEurope-2012-PolzlbauerBB #constraints #design #performance #realtime #reliability

Efficient Constraint Handling during Designing Reliable Automotive Real-Time Systems (FP, IB, EB), pp. 207–220.

CAiSE-2012-EngelAZPW #case study #mining #modelling #process

Mining Inter-organizational Business Process Models from EDI Messages: A Case Study from the Automotive Sector (RE, WMPvdA, MZ, CP, HW), pp. 222–237.

ECMFA-2012-Lonn #challenge #design #modelling

Models Meeting Automotive Design Challenges (HL), pp. 2–3.

RE-2012-AroraSR #feature model #interactive #nondeterminism

Resolving uncertainty in automotive feature interactions (SA, PS, SR), pp. 21–30.

REFSQ-2012-GulkeRJA #complexity #development #problem #requirements

High-Level Requirements Management and Complexity Costs in Automotive Development Projects: A Problem Statement (TG, BR, MJ, JA), pp. 94–100.

SPLC-2012-SchulzeWB #challenge #development #modelling #variability

Automotive model-driven development and the challenge of variability (MS, JW, DB), pp. 207–214.

ICST-2012-MewsSW #modelling

From AUTOSAR Models to Co-simulation for MiL-Testing in the Automotive Domain (MM, JS, SW), pp. 519–528.

CASE-2011-MartinezOGG #adaptation #automation #fault #lens

An adaptable vision system for the automatic inspection of surface defects in automotive headlamp lenses (SSM, JGO, ASG, JGG), pp. 157–162.

DAC-2011-KernZSNT #network

Accuracy of ethernet AVB time synchronization under varying temperature conditions for automotive networks (AK, HZ, TS, JN, JT), pp. 597–602.

DAC-2011-ZinnerNGSW #network

Application and realization of gateways between conventional automotive and IP/ethernet-based networks (HZ, JN, TG, JS, TW), pp. 1–6.

DATE-2011-AcquavivaPOS #power management #reliability

System level techniques to improve reliability in high power microcontrollers for automotive applications (AA, MP, MO, MS), pp. 1123–1124.

DATE-2011-BernardiGSB #fault #self #testing

Fault grading of software-based self-test procedures for dependable automotive applications (PB, MG, ES, OB), pp. 513–514.

DATE-2011-KernST #automation #concept #data type #embedded #migration

An automated data structure migration concept — From CAN to Ethernet/IP in automotive embedded systems (CANoverIP) (AK, TS, JT), pp. 112–117.

DATE-2011-MatischekHGH #communication #realtime

Real-time wireless communication in automotive applications (RM, TH, CG, JH), pp. 1036–1041.

DATE-2011-SieglHGB #embedded #modelling #specification #testing

Formal specification and systematic model-driven testing of embedded automotive systems (SS, KSJH, RG, CB), pp. 118–123.

CSMR-2011-KohlKPDM #analysis #maintenance #multi #using

Using Multivariate Split Analysis for an Improved Maintenance of Automotive Diagnosis Functions (JK, AK, JPP, AD, SM), pp. 305–308.

SCAM-2011-Keul #analysis

Tuning Static Data Race Analysis for Automotive Control Software (SK), pp. 45–54.

CHI-2011-SedlmairIBMPB #named #visual notation

Cardiogram: visual analytics for automotive engineers (MS, PI, DB, MM, CP, AB), pp. 1727–1736.

HCI-ITE-2011-HaslbeckPKPMB #interactive #requirements

Experimental Evaluations of Touch Interaction Considering Automotive Requirements (AH, SP, MK, KP, JM, KB), pp. 23–32.

HCI-ITE-2011-SpiesBLWBH #concept #development #industrial #metric

Measurement of Driver’s Distraction for an Early Prove of Concepts in Automotive Industry at the Example of the Development of a Haptic Touchpad (RS, AB, CL, MW, KB, WH), pp. 125–132.

KMIS-2011-BoughzalaV #collaboration #industrial #maturity

A First Application of a Collaboration Maturity Model in the Automotive Industry (IB, GJdV), pp. 28–37.

REFSQ-2011-PostMP #case study #requirements #strict

Applying Restricted English Grammar on Automotive Requirements — Does it Work? A Case Study (AP, IM, AP), pp. 166–180.

SAC-2011-FabreKT #lessons learnt #robust #using

Robustness of automotive applications using reflective computing: lessons learnt (JCF, MOK, FT), pp. 230–235.

SPLC-2011-TischerMMK #case study #experience #product line #scalability

Experiences from a Large Scale Software Product Line Merger in the Automotive Domain (CT, AM, TM, RK), pp. 267–276.

ICTSS-2011-PeleskaHLLSSVZ #benchmark #concurrent #metric #realtime #testing

A Real-World Benchmark Model for Testing Concurrent Real-Time Systems in the Automotive Domain (JP, AH, FL, HL, HS, PS, EV, CZ), pp. 146–161.

CASE-2010-BorsuYP #automation #detection

Automated surface deformations detection and marking on automotive body panels (VB, AY, PP), pp. 551–556.

CASE-2010-ChenWZZF #analysis #performance #process #towards

Towards performance analysis of wheel loading process in automotive manufacturing (HC, JW, BZ, GZ, TAF), pp. 234–239.

CASE-2010-ChoiEF #assembly #automation #industrial #roadmap

Trends and opportunities for robotic automation of trim & final assembly in the automotive industry (SC, WE, TAF), pp. 124–129.

CASE-2010-RoutrayRS #clustering #detection #fault #reduction

Data reduction and clustering techniques for fault detection and diagnosis in automotives (AR, AR, SS), pp. 326–331.

DATE-2010-FanucciPDSTCLT #programmable

An high voltage CMOS voltage regulator for automotive alternators with programmable functionalities and full reverse polarity capability (LF, GP, PD, RS, FT, PC, LL, PT), pp. 526–531.

DATE-2010-Furst #challenge #design

Challenges in the design of automotive software (SF), pp. 256–258.

DATE-2010-MichailidisSRHK #development

Test front loading in early stages of automotive software development based on AUTOSAR (AM, US, TR, BH, SK), pp. 435–440.

DATE-2010-MullerBGRNZB #design #implementation #manycore #recognition

Design of an automotive traffic sign recognition system targeting a multi-core SoC implementation (MM, AGB, JG, WR, DN, JMZ, OB), pp. 532–537.

DATE-2010-PasettiFS #power management

A High-Voltage Low-Power DC-DC buck regulator for automotive applications (GP, LF, RS), pp. 937–940.

DATE-2010-TraubSKB #network

Scenario extraction for a refined timing-analysis of automotive network topologies (MT, TS, OK, JB), pp. 81–86.

DATE-2010-VazquezCTST #programmable #safety

Programmable aging sensor for automotive safety-critical applications (JCV, VHC, ICT, MBS, JPT), pp. 618–621.

DATE-2010-Voget

AUTOSAR and the automotive tool chain (SV), pp. 259–262.

ECMFA-2010-KakadeMPN #development #modelling

Model-Based Development of Automotive Electronic Climate Control Software (RK, MM, BP, MN), pp. 144–155.

MoDELS-v1-2010-Shiraishi #approach #modelling #variability

An AADL-Based Approach to Variability Modeling of Automotive Control Systems (SS), pp. 346–360.

RE-2010-SieglHG #analysis #modelling #requirements #testing

Model Based Requirements Analysis and Testing of Automotive Systems with Timed Usage Models (SS, KSJH, RG), pp. 345–350.

SPLC-2010-GustavssonE #architecture #industrial #product line

Architecting Automotive Product Lines: Industrial Practice (HG, UE), pp. 92–105.

LCTES-2010-BiehlCT #analysis #development #embedded #modelling #safety

Integrating safety analysis into the model-based development toolchain of automotive embedded systems (MB, DJC, MT), pp. 125–132.

WICSA-ECSA-2009-Axelsson #architecture #case study #embedded #industrial #product line

Evolutionary architecting of embedded automotive product lines: An industrial case study (JA), pp. 101–110.

ASE-2009-RayMACSM #using #validation #verification

Validating Automotive Control Software Using Instrumentation-Based Verification (AR, IM, CA, RC, CPS, CM), pp. 15–25.

CASE-2009-GoswamiSBC

A DECOMSYS based tool-chain for analyzing FlexRay based automotive control applications (DG, PS, UDB, SC), pp. 403–408.

CASE-2009-SankavaramPKPAKP #data-driven #modelling

Model-based and data-driven prognosis of automotive and electronic systems (CS, BRP, AK, KRP, MA, SK, MGP), pp. 96–101.

DAC-2009-WangHHW #framework #named

SysCOLA: a framework for co-development of automotive software and system platform (ZW, AH, WH, MW), pp. 37–42.

DATE-2009-DoriolVFRGP #design

EMC-aware design on a microcontroller for automotive applications (PJD, YV, CF, MR, GG, DP), pp. 1208–1213.

DATE-2009-LettninNBRGKRSR #hardware #verification

Semiformal verification of temporal properties in automotive hardware dependent software (DL, PKN, JB, JR, JG, TK, WR, VS, SR), pp. 1214–1217.

DATE-2009-MarchettiFRM

Shock immunity enhancement via resonance damping in gyroscopes for automotive applications (EM, LF, AR, MDM), pp. 1094–1099.

DATE-2009-OetjensGGN #automation #hardware #process

An automated flow for integrating hardware IP into the automotive systems engineering process (JHO, RG, JG, WN), pp. 1196–1201.

CSMR-2009-Schulte-CoerneTQ #challenge #re-engineering

Challenges in Reengineering Automotive Software (VSC, AT, JQ), pp. 315–316.

HCI-AUII-2009-SpiesABH #interactive #visualisation

Augmented Interaction and Visualization in the Automotive Domain (RS, MA, HB, WH), pp. 211–220.

ICEIS-J-2009-FritzscheML #analysis #concept #data mining #design #industrial #interactive #mining #quality

Interactive Quality Analysis in the Automotive Industry: Concept and Design of an Interactive, Web-Based Data Mining Application (SF, MM, CL), pp. 402–414.

SEKE-2009-ShahrokniFPB #challenge #robust #verification

Robustness Verification Challenges in Automotive Telematics Software (AS, RF, FP, AB), pp. 460–465.

REFSQ-2009-PenzenstadlerSP #modelling #requirements

A Requirements Reference Model for Model-Based Requirements Engineering in the Automotive Domain (BP, ES, KP), pp. 212–217.

SAC-2009-KimmSHS #development #safety

Failure management development for integrated automotive safety-critical software systems (HK, SYS, HsH, COS), pp. 517–521.

SPLC-2009-Slegers #interface #product line

Building automotive product lines around managed interfaces (WJS), pp. 257–264.

ASE-2008-Dominguez #detection #feature model #interactive

Feature Interaction Detection in the Automotive Domain (ALJD), pp. 521–524.

CASE-2008-SoetebierMMKL #assembly #automation #flexibility

Flexible automation for automotive body assembly (SS, CHM, NM, SK, FL), pp. 341–346.

DAC-2008-LukasiewyczGHTRL #concurrent #integration #network #optimisation

Concurrent topology and routing optimization in automotive network integration (ML, MG, CH, JT, RR, BL), pp. 626–629.

DATE-2008-BeckerHEHSL #architecture #communication #design

Design Flows, Communication Based Design and Architectures in Automotive Electronic Systems (JB, MH, RE, AH, WS, VL).

DATE-2008-ForestFASSN #architecture #physics

Physical Architectures of Automotive Systems (TF, AF, GA, MS, ALSV, MDN), pp. 391–395.

DATE-2008-FrankWESN #analysis #architecture #design #evaluation #standard #tool support

Methods, Tools and Standards for the Analysis, Evaluation and Design of Modern Automotive Architectures (EF, RW, RE, ALSV, MDN), pp. 659–663.

DATE-2008-HeineckeDJMKSN #component #reliability

Software Components for Reliable Automotive Systems (HH, WD, BJ, AM, HK, ALSV, MDN), pp. 549–554.

DATE-2008-LettninNRKRKSR #embedded #verification

Verification of Temporal Properties in Automotive Embedded Software (DL, PKN, JR, TK, WR, TK, VS, SR), pp. 164–169.

DATE-2008-MayerH #architecture #optimisation #performance

System Performance Optimization Methodology for Infineon’s 32-Bit Automotive Microcontroller Architecture (AM, FH), pp. 962–966.

DATE-2008-ScheerSB #complexity #reduction #standard

CARbridge, Reduction of System Complexity by Standardisation of the System-Basis-Chips for Automotive Applications (PS, ES, SB), pp. 1107–1110.

DATE-2008-TumeoBCCMPFS #multi #realtime

A Dual-Priority Real-Time Multiprocessor System on FPGA for Automotive Applications (AT, MB, LC, MC, MM, GP, FF, DS), pp. 1039–1044.

ICGT-2008-Dorr #modelling

The AUTOSAR Way of Model-Based Engineering of Automotive Systems (HD), p. 38.

AdaEurope-2008-Natale #component #design #development #embedded

Design and Development of Component-Based Embedded Systems for Automotive Applications (MDN), pp. 15–29.

SEKE-2008-NicaPW #automation #constraints #deployment

A Constraint Model for Automated Deployment of Automotive Control Software (MN, BP, FW), pp. 899–904.

MoDELS-2008-JurjensRT #assurance #modelling #quality

Model-Based Quality Assurance of Automotive Software (JJ, DR, DT), pp. 858–873.

MoDELS-2008-JurjensRT #assurance #modelling #quality

Model-Based Quality Assurance of Automotive Software (JJ, DR, DT), pp. 858–873.

REFSQ-2008-WebersTS #approach #feature model #modelling #requirements

Connecting Feature Models and AUTOSAR: An Approach Supporting Requirements Engineering in Automotive Industries (WW, CT, KS), pp. 95–108.

ICSE-2008-BeekGKM #verification

Formal verification of an automotive scenario in service-oriented computing (MHtB, SG, NK, FM), pp. 613–622.

ICSE-2008-DeissenboeckHJSWGT #clone detection #detection #development #modelling

Clone detection in automotive model-based development (FD, BH, EJ, BS, SW, JFG, ST), pp. 603–612.

ICSE-2008-FritschSSC #adaptation #bound

Time-bounded adaptation for automotive system software (SF, AS, DCS, SC), pp. 571–580.

ICSE-2008-McCafferyPR #agile #assessment #hybrid #named #safety

Ahaa — agile, hybrid assessment method for automotive, safety critical smes (FM, MP, IR), pp. 551–560.

ICSE-2008-ReichertKSMH #analysis #network #protocol

A language for advanced protocol analysis in automotive networks (TR, EK, WS, AM, DH), pp. 593–602.

SPLC-2008-GustavssonA #embedded #flexibility #product line #using

Evaluating Flexibility in Embedded Automotive Product Lines Using Real Options (HG, JA), pp. 235–242.

SPLC-2008-YoshimuraFMP #component #design #modelling #product line

Model-Based Design of Product Line Components in the Automotive Domain (KY, TF, DM, DP), pp. 170–179.

ICST-2008-BringmannK #modelling #testing

Model-Based Testing of Automotive Systems (EB, AK), pp. 485–493.

DAC-2007-Burns #design

Designing a New Automotive DNA (LDB).

DAC-2007-DavareZNPKS #distributed #optimisation #realtime

Period Optimization for Hard Real-time Distributed Automotive Systems (AD, QZ, MDN, CP, SK, ALSV), pp. 278–283.

DAC-2007-Hiller

There Is More Than Moore In Automotive ... (HH), p. 376.

DAC-2007-PimentelP #analysis

Experimental Jitter Analysis in a FlexCAN Based Drive-by-Wire Automotive Application (JRP, JP), pp. 290–293.

DAC-2007-RacuHER #integration

Automotive Software Integration (RR, AH, RE, KR), pp. 545–550.

DAC-2007-RajnakK #architecture #design #distributed #implementation

Computer-aided Architecture Design & Optimized Implementation of Distributed Automotive EE Systems (AR, AK), pp. 556–561.

DAC-2007-SmithCHRSW #difference #industrial #named

Electronics: The New Differential in the Automotive Industry (NS, AC, CH, WCR, ALSV, FW), p. 446.

DATE-2007-DAscoliIMMTFGRM #performance #prototype

Low-g accelerometer fast prototyping for automotive applications (FD, FI, CM, MM, MT, LF, AG, AR, MDM), pp. 486–491.

DATE-2007-PoppNGKP #architecture #evaluation #interactive #towards

Interactive presentation: Towards a methodology for the quantitative evaluation of automotive architectures (PP, MDN, PG, SK, CP), pp. 504–509.

DATE-2007-ZhengNPGV #distributed #modelling #realtime #synthesis

Synthesis of task and message activation models in real-time distributed automotive systems (WZ, MDN, CP, PG, ALSV), pp. 93–98.

HCI-AS-2007-PoitschkeARR #evaluation #framework #multi #user interface

A Multifunctional VR-Simulator Platform for the Evaluation of Automotive User Interfaces (TP, MA, SR, GR), pp. 1120–1129.

HIMI-MTT-2007-AblassmeierPRR #network #using

Context-Aware Information Agents for the Automotive Domain Using Bayesian Networks (MA, TP, SR, GR), pp. 561–570.

HIMI-MTT-2007-Fleischmann #modelling #specification

Model Based HMI Specification in an Automotive Context (TF), pp. 31–39.

ICEIS-DISI-2007-AldazabalBM #industrial #process

Activity theory model — application in the automotive industry (JA, GB, JAM), pp. 615–620.

ICEIS-SAIC-2007-HoubenLCS #framework #web

A Web-Based Central Gateway Infrastructure in the Automotive After-Sales Market — Business Interoperability through the Web (GH, KL, KC, FS), pp. 45–50.

ECMDA-FA-2007-BrorkensK #abstraction #legacy #metamodelling #standard #tool support #xml

Improving the Interoperability of Automotive Tools by Raising the Abstraction from Legacy XML Formats to Standardized Metamodels (MB, MK), pp. 59–67.

SPLC-2007-TischerMKG #product line #why

Why does it take that long? Establishing Product Lines in the Automotive Domain (CT, AM, MK, LG), pp. 269–274.

CAV-2007-Kropf #debugging #development #formal method #industrial #question

Software Bugs Seen from an Industrial Perspective or Can Formal Methods Help on Automotive Software Development? (TK), p. 3.

DATE-2006-Friedman #design #matlab

MATLAB/Simulink for automotive systems design (JF), pp. 87–88.

DATE-2006-KanajanZPS #architecture #distributed #integration #trade-off #using

Exploring trade-off’s between centralized versus decentralized automotive architectures using a virtual integration environment (SK, HZ, CP, ALSV), pp. 548–553.

DATE-2006-Lamberg #modelling #testing

Model-based testing of automotive electronics (KL), p. 91.

DATE-2006-Leteinturier #challenge

Automotive semi-conductor trend & challenges (PL), p. 559.

DATE-2006-Muller-Glaser #design #modelling

Domain specific model driven design for automotive electronic control units (KDMG), p. 557.

DATE-2006-SebekeJHFSG #challenge #reliability

Test and reliability challenges in automotive microelectronics (CS, CJ, KH, SF, JS, PG), p. 547.

DATE-2006-Weber #communication #network

Management of complex automotive communication networks (TW), pp. 554–555.

DATE-DF-2006-OetjensGR #design #flexibility #rule-based #specification

Flexible specification and application of rule-based transformations in an automotive design flow (JHO, JG, WR), pp. 82–87.

DATE-DF-2006-SaponaraT #design

Mixed-signal design of a digital input power amplifier for automotive audio applications (SS, PT), pp. 212–216.

DATE-DF-2006-SerafiniCRZ #configuration management #framework #multi

Multi-sensor configurable platform for automotive applications (LS, FC, TR, VZ), pp. 219–220.

DATE-DF-2006-ZarriCDMPRT #on the #protocol #verification

On the verification of automotive protocols (GZ, FC, FD, RM, MP, GR, CT), pp. 195–200.

EDOC-2006-MutschlerBR #empirical #industrial #information management #why

Why Process-Orientation is Scarce: An Empirical Study of Process-oriented Information Systems in the Automotive Industry (BM, JB, MR), pp. 433–440.

ICPR-v2-2006-KennedyNS #classification

An LVQ-based Automotive Occupant Classification System (KRK, JFN, MS), pp. 662–665.

KDD-2006-Cavaretta #challenge #data mining #mining

Data mining challenges in the automotive domain (MC), p. 836.

RE-2006-TormerIP #assessment #case study #empirical #quality

An Empirical Quality Assessment of Automotive Use Cases (FT, MI, FP, PÖ), pp. 86–95.

ICSE-2006-Broy #challenge #re-engineering

Challenges in automotive software engineering (MB), pp. 33–42.

DATE-2005-BortolazziMBM #architecture

Automotive System Architectures (Automotive Special Day) (JB, JLM, JB, CM), p. 654.

DATE-2005-ChappellMPOFS #adaptation #generative #realtime #safety

Exploiting Real-Time FPGA Based Adaptive Systems Technology for Real-Time Sensor Fusion in Next Generation Automotive Safety Systems (SC, AM, DP, DO, BF, CS), pp. 180–185.

DATE-2005-FanucciGIMR #design #framework

Platform Based Design for Automotive Sensor Conditioning (LF, AG, FI, CM, AR), pp. 186–191.

DATE-2005-Heinecke #challenge #design

Automotive System Design — Challenges and Potential (HH), pp. 656–657.

DATE-2005-JeffreyCPLRR #configuration management #integration #monitoring #online #safety #using

The Integration of On-Line Monitoring and Reconfiguration Functions using IEEE1149.4 Into a Safety Critical Automotive Electronic Control Unit (CJ, RC, SP, ML, AR, SR), pp. 153–158.

DATE-2005-Langenwalter #development #embedded #process

Embedded Automotive System Development Process (JL), pp. 538–539.

DATE-2005-Lyons #design #embedded

Meeting the Embedded Design Needs of Automotive Applications (WL), pp. 142–147.

DATE-2005-StaschulatESW #analysis #performance

Context Sensitive Performance Analysis of Automotive Applications (JS, RE, AS, FW), pp. 165–170.

DATE-2005-ZiegenbeinBFBRS #development #modelling #named

AutoMoDe — Model-Based Development of Automotive Software (DZ, PB, UF, AB, JR, BS), pp. 171–177.

FM-2005-EislerSJSS #case study #model checking

Preliminary Results of a Case Study: Model Checking for Advanced Automotive Applications (SE, CS, BJ, GS, JS), pp. 533–536.

ICEIS-v5-2005-CostagliolaMF #evaluation #framework

A Framework for the Evaluation of Automotive Telematics Systems (GC, SDM, FF), pp. 3–11.

DATE-DF-2004-BannowH #design #evaluation #hardware #object-oriented

Evaluation of an Object-Oriented Hardware Design Methodology for Automotive Applications (NB, KH), pp. 268–273.

ICEIS-v5-2004-CostagliolaMFOMP #information management #interface

An Innovative Vocal Interface for Automotive Information Systems (GC, SDM, FF, GO, UM, AP), pp. 9–14.

ICPR-v2-2004-BouchaffraT #concept #design #mining

Introduction to the Concept of Structural HMM: Application to Mining Customers’ Preferences in Automotive Design (DB, JT), pp. 493–496.

ICPR-v3-2004-NakaiTHOO #detection

A Practical Stereo Scheme for Obstacle Detection in Automotive Use (HN, NT, HH, YO, KO), pp. 346–350.

RE-2004-HeumesserH #case study #experience #process #requirements

Experiences in Managing an Automotive Requirements Engineering Process (NH, FH), pp. 322–327.

RE-2004-OmasreiterM #case study #process #specification

A Context-Driven Use Case Creation Process for Specifying Automotive Driver Assistance Systems (HO, EM), pp. 334–339.

RE-2004-PuschnigK #development #embedded #requirements

Requirements Engineering in the Development of Innovative Automotive Embedded Software Systems (AP, RTK), pp. 328–333.

DATE-2003-JersakREBJW #formal method #integration

Formal Methods for Integration of Automotive Software (MJ, KR, RE, JCB, ZYJ, FW), pp. 20045–20050.

DATE-2003-MangerucaFSPP #case study #design #detection #embedded

System Level Design of Embedded Controllers: Knock Detection, A Case Study in the Automotive Domain (LM, AF, ALSV, AP, MP), pp. 20232–20237.

DATE-2003-TindellKWE #development

Safe Automotive Software Development (KT, HK, FW, RE), pp. 10616–10623.

ICEIS-v2-2003-BouchaffraT #industrial #markov

Structural Hidden Markov Model and Its Application in Automotive Industry (DB, JT), pp. 155–164.

ICSE-2003-Broy #re-engineering

Automotive Software Engineering (MB), pp. 719–720.

ICSE-2003-Grimm #challenge

Software Technology in an Automotive Company — Major Challenges (KG), pp. 498–505.

VLDB-2002-CiliaHB #internet #profiling

Profiling and Internet Connectivity in Automotive Environments (MC, PH, APB), pp. 1071–1074.

ICEIS-2002-GusikhinKRACM #artificial reality #assembly

Virtual Reality Web-Based Environment for Workcell Planning in an Automotive Assembly (OYG, EK, GR, CA, GC, TM), pp. 263–268.

RE-2002-WeberW #case study #challenge #development #experience #requirements

Requirements Engineering in Automotive Development — Experiences and Challenges (MW, JW), pp. 331–340.

DATE-2001-Axelsson #architecture #tool support

Methods and tools for systems engineering of automotive electronic architectures (JA), p. 112.

DATE-2001-DemmelerG #communication #framework #integration

A universal communication model for an automotive system integration platform (TD, PG), pp. 47–54.

DATE-2001-StaaB #design #embedded #roadmap #tutorial

Embedded tutorial: current trends in the design of automotive electronic systems (PvS, TB), pp. 38–39.

KDD-2001-HotzGHNW #analysis #detection #industrial

REVI-MINER, a KDD-environment for deviation detection and analysis of warranty and goodwill cost statements in automotive industry (EH, UG, WH, GN, MW), pp. 432–437.

KDD-2000-GerstenWA #case study #experience #modelling #predict #roadmap #tool support

Predictive modeling in automotive direct marketing: tools, experiences and open issues (WG, RW, DA), pp. 398–406.

TOOLS-USA-2000-Khwaja #concurrent #embedded #multi #testing #thread #validation

An MFC Based Multi-Threaded Test Environment for the Validation of an Embedded Automotive Microcontroller (AAK), pp. 15–24.

DATE-1999-Thoma #challenge

Automotive Electronics — A Challenge For Systems Engineering (PT), p. 4.

DATE-1998-MoserM #design #modelling #named

VHDL-AMS: The Missing Link in System Design — Experiments with Unified Modelling in Automotive Engineering (EM, NM), pp. 59–63.

HCI-CC-1997-SchlickHSSW #design

Investigation of Desktop-Teleconferencing Systems in Automotive Design (CMS, DH, JS, JS, MW), pp. 305–308.

KDD-1996-WirthR #approach #database #detection #multi

Detecting Early Indicator Cars in an Automotive Database: A Multi-Strategy Approach (RW, TPR), pp. 76–81.

ICML-1995-Pomerleau #learning

Learning for Automotive Collision Avoidance and Autonomous Control (DP), p. 589.

DAC-1977-Brown #component #design #using

Using a computer aided graphics system to help design and draft automotive components (NLB), pp. 112–117.